# Barge departure shown as gate-out

**URL:** <https://community.dockflow.com/t/barge-departure-shown-as-gate-out/78>\
**Category:** Known and fixed issues\
**Created:** [November 6, 2026, 2:42pm UTC](https://community.dockflow.com/t/barge-departure-shown-as-gate-out/78 "2026-11-06T14:42:25Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![dockflow](https://community.dockflow.com/letter_avatar_proxy/v4/letter/d/a9a28c/32.png) [@dockflow](https://community.dockflow.com/u/dockflow)\
**Post date:** [November 6, 2026, 2:42pm UTC](https://community.dockflow.com/t/barge-departure-shown-as-gate-out/78/1 "2026-11-06T14:42:25Z")

</div>

**Status:** Fixed since August 2026

**How to recognise it**  
While the problem existed, you saw an OOCL barge departure published with a gate-out code instead of a vessel departure code. The event looked like a gate move, not a vessel departure.

**Which shipments this affects**  
OOCL barge departures and arrivals.

**Cause**  
OOCL reports the pre-carriage leg with transport mode Barge.

**What changed**  
OOCL barge departures and arrivals now show as vessel departure and arrival events instead of gate-out and gate-in.

**Is past data corrected?**  
No. The fix applies from that month on; earlier data stays as it was.

**How to check your shipment**  
Open the shipment’s event list and look at the barge departure and arrival codes. A barge departure should show as a vessel departure, and a barge arrival should show as a vessel arrival. If a barge event still shows gate-out or gate-in, contact support.

**Do you need to do anything?**  
Nothing.