# Sea leg shown as a truck journey with wrong port of loading and departure date

**URL:** <https://community.dockflow.com/t/sea-leg-shown-as-a-truck-journey-with-wrong-port-of-loading-and-departure-date/64>\
**Category:** Known and fixed issues\
**Created:** [November 6, 2026, 2:38pm UTC](https://community.dockflow.com/t/sea-leg-shown-as-a-truck-journey-with-wrong-port-of-loading-and-departure-date/64 "2026-11-06T14:38:20Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![dockflow](https://community.dockflow.com/letter_avatar_proxy/v4/letter/d/a9a28c/32.png) [@dockflow](https://community.dockflow.com/u/dockflow)\
**Post date:** [November 6, 2026, 2:38pm UTC](https://community.dockflow.com/t/sea-leg-shown-as-a-truck-journey-with-wrong-port-of-loading-and-departure-date/64/1 "2026-11-06T14:38:20Z")

</div>

**Status:** Fixed since June 2026

**How to recognise it**  
A tradeflow showed a sea leg between two ports as a truck journey. The port of loading and departure date were wrong.

**Which shipments this affects**  
Shipments with a sea leg between two ports followed by onward loading at another port.

**What changed**  
The tradeflow now shows the real port of loading and the correct departure date. The first sea leg is no longer shown as truck or rail pre-carriage.

**Is past data corrected?**  
No. The fix applies from that month on; earlier data stays as it was.

**How to check your shipment**  
Open the tradeflow for a shipment with a sea leg between two ports. Check that the sea leg is not shown as a truck journey and that the port of loading is the real loading port, not a transshipment port. Contact support if the port of loading or departure date is still wrong.

**Do you need to do anything?**  
Nothing.